Shop

 

 

How to order

Email to Bestellung@glattCAD.de.
Please name the Sets with their letters You would like to purchase (e. g. "Set A, B and C").
Confirm in a short sentence that You read the AGBs und the Widerrufsrecht and that You agree with them.
You will promptly recieve an order confirmation by email.

The delivery time is about 2 to 3 weeks. Please do not pay before seperate prompt: At the start of producing or assembling Your Sets You will recieve another email with the glattCAD bank details.

As a so-called small business owner ("Kleinunternehmer" i. S. von § 19 Abs. 1 UStG) no sales taxes are charged.

 

x

 

 

Messerschmitt Me 209 V1

 

In order to offer the highest flexibility You can arrange Your own Me-209 packet by combining Sets.

 

Set
ME209.A

Milled Parts Short Kit (~ 7.0 m2 wood and glassfibre)

554,00

CNC milled frames, ribs, servo frames, battery slot and more, made from poplar plywood; selected with respect to quality and tolerance
Milled mountig frames, 3 mm poplar plywood for perfect assembly of fuselage, stabilizers and rudders
Milled items of air plywood, thickness from 1 to 6 mm, various reinforcements, parts of battery rail system, pedals, pilot´s seat sledge, engine mount, main gear frames, and more
Milled balsa parts, selected (0.2..0.35 gr/cm3), for the "comb spar boxes" of the spar pairs in wings und control surfaces, wheel well claddings, slotted flaps, various filling parts, etc.
Milled balsa lining/fill material for nose areas of all rudders and stabilizers
Milled glassfibre parts, 2 mm and 3 mm thick, for the canopy´s "tube frame", control horns (ailerons, elevator, vertical fin, flaps, tail wheel), flaps hinges, pedals´ parts, control horn, more ...
Milled 1 mm acrylglas for cockpit instruments
Build manual for free download, 125 pages, more than 250 images

 

Set
ME209.B1

Spars (70 m) - Balsa Sheeting (~ 4,2 m2)

119,00

Pine strips at 1000 mm x 3 mm x 3 mm, for the spars of fuselage, wings, horizontal and vertical stab´s
Balsa sheeting boards 1000 mm x 100 mm, 2 mm, selected (approx. 0.15 gr/cm3), for sheeting of full aircraft

 

Set
ME209.B2

As an Alternative to Set ME209.B1:
Spars (> 80 m) - Balsa Sheeting (~ 2,2 m2)
Fuselage Sheeting (2,5 m2), 3D-designed and milled

198,00 €

Pine strips at 1000 mm x 3 mm x 3 mm, for the spars of fuselage, wings, horizontal and vertical stab´s
Balsa Sheeting 1000 mm x 1000 mm x 2 mm, selected (ca. 0,15 gr/cm3),
for wings and elevator
Balsa Sheeting 1000 mm x 250 mm x 2 mm, selected (ca. 0,15 gr/cm3),
for fuselage and rudder, 3D designed and
milled

 

Set
ME209.C

Carbon Spinner

145,00 €

Spinner from multilayered carbon fibre fabric, laminate handicrafted
Spinner base and centre plate; milled from 3 mm resp. 2 mm glass fibre material

 

Set
ME209.D

Canopy

48,00 €

from Vivak ® or comparable material, 1,0 mm, professionally deep-drawn

 

Set
ME209.E

Main Gear Fairings (2 parts) - Rest Covers (2 parts)

109,00 €

 multilayered glass fibre fabric, laminate handicrafted
stabilized one-sided, with 2mm balsa support layer
evacuated or pressed

 

Set
ME209.F

Pilot´s Seat

48,00 €

 multilayered glass fibre fabric, laminate handicrafted

 

Set
ME209.G

Plug-In Mounts Strongal ® (Fa. Petrausch)

89,00 €

Heavy-duty aluminium plug-in mounts, Strongal ®, Ø 35 mm and Ø 12 mm, each consisting of tube (805 mm and 225 mm) and guide tubes, accurately prepared and cut

 

Set
ME209.H

Manual (German, but many many images!)

00,00 €

PDF manual for free download
Take Your time and have a close look into this booklet so You will easily see if You will master the build of this extraordinary rc model. Although the model´s structure can be managed in only a few days due to the perfect fit of its parts, finishing the aircraft will need a certain amount of steadiness anyway.

 

 

 

x

 

 

D. H. 88 Comet

 

In order to offer the highest flexibility You can arrange Your own Comet packet by combining Sets.

 

Set
DH88.A

Milled Parts Short Kit (approx. 5.5 m2 wood and glassfibre)

425,00 €

CNC milled frames, ribs, servo frames, battery slot and more, made from poplar plywood; selected with respect to quality and tolerance
Milled mounting frames, 3 mm poplar plywood for perfect assembly of fuselage, stabilizers and rudders
Milled balsa parts, selected (0.2..0.35 gr/cm3), for the "comb spar boxes" of the spar pairs in wings und control surfaces, various filling parts, cockpit tub, glare shield, etc.
Milled balsa parts, selcted (0.1..0.15 gr/cm3), esp. for non-planar elements of cockpit tub
Milled glassfibre parts, 2 mm and 2.5 mm thick, for two battery carriers, the canopy´s "tube frame", front main gear frames, control horns (ailerons, elevator, vertical fin, flaps, tail wheel), flaps hinges two motor carriers and two battery trays

 

Set
DH88.B1

Spars (> 100 m) - Balsa Filling Pieces - Balsa Sheeting
(approx. 3.5 m2)

154,00 €

Pine strips at 1000 mm x 3 mm x 3 mm, for the spars of fuselage, wings, cowlings, horizontal and vertical stab´s
Pine strips at 1000 mm x 3 mm x 5 mm, for fuselage spars
CNC-milled balsa strips at 1000 mm x 3 mm x 3 mm; selected (approx. 0.35 gr/cm3), for building up spars in fuselage, wings, stabilizers and cowlings
Balsa filling pieces, 1000 mm x 50 mm x 25 mm, selektiert (0.1..0.15 g/cm3),
for rudders´ frontal area, pin hinge und various filling pieces
Sheeting boards 1000 mm x 100 mm, 1.5 mm and 2 mm, selected (approx. 0.15 gr/cm3)

 

Set
DH88.B2

Alternatively: Spars, Balsa Filling Pieces, Balsa Sheeting,
Sheeting for Fuse and Cowlings 3D-designed and milled

239,00 €

identical to Set DH88.B1, but:
Balsa Sheeting 1000 mm x 250 mm, 2 mm
for fuselage and motor cowings 3Ddesigned and
milled

 

Set
DH88.C

Canopy - "Landing Light Glass" - Wheel pants

85,00 €

Canopy, Vivak ®, 1.0 mm, deep-drawn
Landing light glass, Vivak ®, 1.0 mm, deep-drawn
glass reinf. fibre wheel pants

 

Set
DH88.D

Plug-In Mounts Strongal ® (Fa. Petrausch)

65,00 €

Heavy-duty aluminium plug-in mounts, Strongal ®,  Ø 22 mm
Heavy-duty aluminium plug-in mounts, Strongal ®, Ø 18 mm, each consiting of tubes (337 mm) and guide tubes (186 mm, 151 mm), accurately cut

 

Set
DH88.E

Electrical Kit - Various Assessories

129,00 €

"Gold contact" male/female connectors, Ø 5,5 mm
High current cables, silicone shrouded, 2,5 mm2, red and black
High current male/female connectors, incl. mounting adapter;
for electrical connection (aileron servo and optional position lights) at the wing/fuse interfaces
Capacitors ultra-low ESR, 1000 µF/50V
Resistance 50 Ω; for no-spark function
Thread buffers; for mechanically damping plug/jack connection of battery carrier and battery carrier abutment.
Machine-lathed brassring; easy cerntering the batterypack into the battery carrier abutment; no-spark function´s element
lLocknuts M3; screw connection of the two main gear bearing blocks in the cowlings
Machnine lathed and drilled aluminum pegs; locking battery carrier and battery carrier abutment
Clamps 27 mm; for fixing/adjusting battery carrier at its desired position
Blind nuts M6; wings locking
Nylon screws M6 mm x 30 mm; wings locking
Hinges Ø 4,5 mm x 68 mm; rudder control (ailerons, elevator, rudder)
Rare earth peg magnets,
Rare earth flat magnets; comfortable detent of the removable fuse nose
Locknuts M4; screwing rubber buffers to the battery carriers
Drinking staws Ø 6,6 mm x 75 mm; for wire ducting of electrical connections
Bowden cables á 1000 mm, Ø 3,2 mm, incl. Ø 0,8 mm steel core and fork clevis
Tailwheel Ø 38 mm on aloy rim
Bended spring steel wire Ø 3 mm; for tail wheel
Adjusting rings M3; for detent of tailwheel
Brass bushing 32 mm x Ø 5 mm x Ø 3 mm; tail wheel

 

Set
DH88.F

Decals

0,00 €

DXF-Download for free -> Grosvenor House G-ACSS <- -> Black Magic G-ACSP <-

 

Set
DH88.G

Manual (German, but many many images; incl. Manual for Retractable Main Gear)

25,00 €

Printed manual, ca. 150 pages, coloured, more than 300 images and illustrations, valuable and durable binding
Cost price
Alternatively: pdf manual for free download
Take Your time and have a close look into this booklet so You will easily see if You will master the build of this extraordinary rc model. Although the model´s structure can be managed in only a few days due to the perfect fit of its parts, finishing the aircraft will need a certain amount of steadiness anyway.

 

Set
DH88.H

Main Landing Gear

215,00 €

Aluminium gear legs, consisting of stanchion tube, immersion tube and springs, lenghth 140 mm
Milled parts from glass fibre reinf. plastic plates, 2.5 mm; for rear main gear frames, bearing blocks and "motor see-saws"
Stainless steel pipe Ø 6 mm x 0.3 mm; for manufacturing gear kinematics by hard-soldering
Steel rings Ø 12.6 mm x 0.3 mm; for connecting gear legs to gear kinematics
Precisely 3D-milled MDF (medium density fibre-board) frames; for preparation of the stainless steel tubes
Auxiliary construction for hard-soldering the gear kinematics,  precisely 3D-milled, three parts, fire resistent Vermiculit
Steel hinges, for connection of the steel tube elements
Aluminium drive nuts, machine lathed, drilled, threads cutted
Drive jacks M4
Aluminium connector Ø 8 mm, lathed, drilled, threads cutted, incl. grub screws M3;  for connecting drive screws to the motor shafts
Brass bushings; for bearing the drive nuts
Curved C-binder from spring stell wire Ø 5 mm; for aligning the gear legs
Spring steel wire Ø 4 mm; for wheel axles
Spring steel wire Ø 3 mm; for the motor see-saws´ axles at the aft bearing blocks
Fillister head screws (hex socket) M3 x 16 mm; for connecting the bearing blocks to the engine nacelles
Fillister head screws (hex socket)  M3 x 10 mm; for connecting the moving parts of the gear kinematics
Hex locknuts M3; for connecting the moving parts of the gear kinematics
Shaft circlips 3 mm; for securing the "motor see-saws"

 

Set
DH88.I

Main Landing Gear Electric

135,00 €

Two brushed motors, 12V, with flanged gearbox 50:1
Two electronic speed controllers, 12 V/10A; splashproof; for control of landing gear drives
Four Microswitches, splashproof (IP 67); for detection of in-/out movements´ endpositions

 

Set
DH88.K

Third Battery Carrier
(Two glassfibre carriers are included in Set A already!)

29,00 €

Milled parts from glass fibre reinf. plastic plates, 2mm
"Gold contact" male/female connectors, Ø 5,5 mm
Thread buffers; for mechanically damping plug/jack connection of battery carrier and battery carrier abutment.
Locknuts M4; screwing rubber buffers to the battery carriers

 

----------------------------------

 

Shipping (e. g. for Set A und B; paket, 120 cm x 60 cm x 30 cm)

Deutschland DHL

10,90 €

Europa

variabel

ca. 30,00 €

Welt variabel

ca. 40 - 80,00 €

Please ask before/when ordering. We always try to find the best offer for You. Shipping will be without any additional charges. Packaging is for free.

 

----------------------------------

 

Accessories recommended (not included in theComet Sets yet)

- Two brushless external rotor motors (e.g..: 400 .. 450 gr, Ø 50 mm, length 60 .. 65 mm, kv = 250 .. 300 rpm/V)
- Two HV-ESCs 50 .. 75 A
- Lipo 8s, 5000 .. 5800 mAh
- Two Props ca. 15" x 12"
- Two spinners Ø 76 mm
- LED-lighting
- Various glues
- Balsa filler
- Polyesther filling paste
- Fibre reinforced laminates
- RC-components
- Wheels Ø 125 mm x 45 mm
- Finish and scale details (at one´s own discretion)

#

 

x

 

 

gearCONTROL.846

Microcontroller
for retractable landing gear
, gear doors, light and special functions

 

Set
gC.846

Electronic Gear and Light Controller gearCONTROL.846

79,00 €

Free control of up to 8 servos or electronic speed controllers ESCs (channels) for legs, gear doors, speed brakes, etc.
Reading of up to 8 limit switches (with control of ESCs)
8 configurable in-/out speeds
4 special channels, e. g.  for light, flashing light, rotating beacon, siren on/off, etc.
Consideration of mutual channel dependences embedded in up to 6 parallel freely configurable sequences
Runtime monitoring for ESCs
Direct influence on the special channels by transmitter´s second RC output
Behaviour of gear an light alternatively generated from one or two RC channels´ information
Seperated power supply pins (input) for gearCONTROL.846, servos and special channels
Manual gearCONTROL.846 -> pdf-Datei <-
Update: Firmware und PC-Software

 

 

x

 

 

- Information may be subject to correction -

recent change: 2018-02-09